Реверберационная камера SMART 200. Полностью металлическая камера, внутри которой распределение поля происходит статически равномерно (по амплитуде, фазе, поляризации). При вращении РЧ отражателей полностью исключается влияние эффекта стоячих волн. Эти камеры идеальны для тестирования на помехоустойчивость, тестирования на ЭМС сложных систем (компьютерных систем, медицинского оборудования, авионики, приводов и двигателей…….).
Подробнее
Key Features
• For Full and Pre-Compliance Testing Including:
MIL-STD 461G
SAEJ1113/27
GMW3097
EUROCAE\RTCA DO160F/G
FORD FMC 1278
IEC 61000-4-21
Electrical Specifications
Frequency Minimum: 200 MHz
Frequency Maximum: 18 GHz (40 GHz)
Physical Specifications
Shield Room Inner Length: 4.83 m
Shield Room Inner Width: 3.61 m
Shield Room Inner Height: 3.05 m
Internal Working Volume Length: 2.20 m
Internal Working Volume Width: 1.60 m
Internal Working Volume Height: 1.50 m
Other Specifications
• Polyethylene Vapor Barrier, 6 mil
• One ETS-Lindgren 3030 'Z' Fold Tuner, Complete with RF Shielded Mounting Bearing Assembly
• Two Ceiling Mounted LED Strip Light Fixtures (Electrical Distribution not included)
• Installation of Enclosure and ETS-Lindgren Equipment
• One ETS-Lindgren Model EMCenter™ with EMControl™ Device Controller Plug-in Module
• One ETS-Lindgren Motor Base with Rotation Speed of 1 to 12 rpm and Mounting Penetration Hardware
• Guaranteed Performance and a Five-year Limited Warranty; One-year Warranty on Doors, Filters and Moving Parts; Two-year Warranty on Optional ETS-Lindgren's Equipment
• One Single-leaf, ETS-Ray Proof Series 201, Recessed Contact Mechanism (RCM), Manually Operated, RF-Shielded Personnel Door, 0.91 m x 2.13 m Clear Opening
• Reverberation Test per IEC 61000-4-21 in Steps from 200 MHz to 1 GHz per the Recommended Procedure
• One Connector Panel, 15.24 cm x 30.48 cm)
• Two Steel Honeycomb Waveguide Air Vents 30.48 cm x 30.48 cm
• Two Connector Panels, 15.24 cm x 30.48 cm Dielectric Floor Underlay, 0.32 cm Thick
• ETS-Lindgren Proprietary TILE! Software to Perform EMS Measurements per SAEJ1113/27, GMW3097, MIL-STD 461G and RTCA DO160F/G, IEC 61000-4-21
• One 10 m Fiber Optic Cable
• Modular Shielded Room and Support Structure
• One Door Maintenance Kit
• For Full and Pre-Compliance Testing Including:
MIL-STD 461G
SAEJ1113/27
GMW3097
EUROCAE\RTCA DO160F/G
FORD FMC 1278
IEC 61000-4-21
Electrical Specifications
Frequency Minimum: 200 MHz
Frequency Maximum: 18 GHz (40 GHz)
Physical Specifications
Shield Room Inner Length: 4.83 m
Shield Room Inner Width: 3.61 m
Shield Room Inner Height: 3.05 m
Internal Working Volume Length: 2.20 m
Internal Working Volume Width: 1.60 m
Internal Working Volume Height: 1.50 m
Other Specifications
• Polyethylene Vapor Barrier, 6 mil
• One ETS-Lindgren 3030 'Z' Fold Tuner, Complete with RF Shielded Mounting Bearing Assembly
• Two Ceiling Mounted LED Strip Light Fixtures (Electrical Distribution not included)
• Installation of Enclosure and ETS-Lindgren Equipment
• One ETS-Lindgren Model EMCenter™ with EMControl™ Device Controller Plug-in Module
• One ETS-Lindgren Motor Base with Rotation Speed of 1 to 12 rpm and Mounting Penetration Hardware
• Guaranteed Performance and a Five-year Limited Warranty; One-year Warranty on Doors, Filters and Moving Parts; Two-year Warranty on Optional ETS-Lindgren's Equipment
• One Single-leaf, ETS-Ray Proof Series 201, Recessed Contact Mechanism (RCM), Manually Operated, RF-Shielded Personnel Door, 0.91 m x 2.13 m Clear Opening
• Reverberation Test per IEC 61000-4-21 in Steps from 200 MHz to 1 GHz per the Recommended Procedure
• One Connector Panel, 15.24 cm x 30.48 cm)
• Two Steel Honeycomb Waveguide Air Vents 30.48 cm x 30.48 cm
• Two Connector Panels, 15.24 cm x 30.48 cm Dielectric Floor Underlay, 0.32 cm Thick
• ETS-Lindgren Proprietary TILE! Software to Perform EMS Measurements per SAEJ1113/27, GMW3097, MIL-STD 461G and RTCA DO160F/G, IEC 61000-4-21
• One 10 m Fiber Optic Cable
• Modular Shielded Room and Support Structure
• One Door Maintenance Kit