Реверберационная камера SMART 80. Полностью металлическая камера, внутри которой распределение поля происходит статически равномерно (по амплитуде, фазе, поляризации). При вращении РЧ отражателей полностью исключается влияние эффекта стоячих волн. Эти камеры идеальны для тестирования на помехоустойчивость, тестирования на ЭМС сложных систем (компьютерных систем, медицинского оборудования, авионики, приводов и двигателей…….).
Подробнее
Описание
Key Features
• For Full and Pre-Compliance Testing Including:
MIL-STD 461G
SAEJ1113/27
GMW3097
FMC-1278
EUROCAE\RTCA DO160F/G
IEC6000-4-21
DEF STAN 5941
HERO, HIRF Testing
SE Testing
Single or Dual Stirrers
Continuous or Stepped Rotation
• 80 MHz - 18 GHz (40GHz)
Electrical Specifications
Frequency Minimum 80 MHz
Frequency Maximum 18 GHz (40 GHz)
Physical Specifications
Shield Room Inner Length: 13.41 m
Shield Room Inner Dim Width: 6.09 m
Shield Room Inner Dim Height: 4.87 m
Internal Working Volume Length: 4.50 m
Internal Working Volume Width: 4.00 m
Internal Working Volume Height 2.20 m
Other Specifications
• Two ETS-Lindgen 6060 'Z' Fold Tuners, CW RF Shielded Bearing Mounting Assembly
• Two ETS-Lindgren Motor Base Drivers with Rotational Speed Control of 1 to 16 rpm
• Four LED Strip Light Fixtures (Electrical Distribution not Included)
• Installation of Enclosure and ETS-Lindgren Equipment
• Two 5.08 cm Threaded Brass Pipe Penetrations with Flange Nuts and Caps
• Two Waveguide Vents, 30.48 cm x 30.48 cm in the Ceiling
• One Single-leaf, ETS-Ray Proof Series 201, Recessed Contact Mechanism (RCM), Manually Operated, RF-shielded Personnel Door, .91 m x 2.13 m Clear Opening
• One Connector Panel, 20.32 cm x 20.32 cm
• Reverberation Test per IEC 61000-4-21 in Steps from 80 MHz to 1 GHz per the Recommended Procedure
• Two Connector Panels, 15.24 cm x 61 cm
• Dielectric Floor Underlay 3.175 mm Thick
• Shield Test per IEEE 299, One Frequency Test at 1 GHz
• One Threaded Brass Ground Stud 1.27 cm Diameter x 12.7 cm Long
• Modular Shielded Room and Support Structure
• One ETS-Lindgren EMCenter™ with EMControl™ Device Controller Plug-in
• Interior Nominal Shield-to-shield Dimensions of 13.41 m x 6.09 m x 4.87 m
• One Door Maintenance Kit
• Guaranteed Performance and a Five-year Limited Warranty; One-year Warranty on Doors, Filters and Moving Parts; Two Year Warranty on Optional ETS-Lindgren's Equipment
• For Full and Pre-Compliance Testing Including:
MIL-STD 461G
SAEJ1113/27
GMW3097
FMC-1278
EUROCAE\RTCA DO160F/G
IEC6000-4-21
DEF STAN 5941
HERO, HIRF Testing
SE Testing
Single or Dual Stirrers
Continuous or Stepped Rotation
• 80 MHz - 18 GHz (40GHz)
Electrical Specifications
Frequency Minimum 80 MHz
Frequency Maximum 18 GHz (40 GHz)
Physical Specifications
Shield Room Inner Length: 13.41 m
Shield Room Inner Dim Width: 6.09 m
Shield Room Inner Dim Height: 4.87 m
Internal Working Volume Length: 4.50 m
Internal Working Volume Width: 4.00 m
Internal Working Volume Height 2.20 m
Other Specifications
• Two ETS-Lindgen 6060 'Z' Fold Tuners, CW RF Shielded Bearing Mounting Assembly
• Two ETS-Lindgren Motor Base Drivers with Rotational Speed Control of 1 to 16 rpm
• Four LED Strip Light Fixtures (Electrical Distribution not Included)
• Installation of Enclosure and ETS-Lindgren Equipment
• Two 5.08 cm Threaded Brass Pipe Penetrations with Flange Nuts and Caps
• Two Waveguide Vents, 30.48 cm x 30.48 cm in the Ceiling
• One Single-leaf, ETS-Ray Proof Series 201, Recessed Contact Mechanism (RCM), Manually Operated, RF-shielded Personnel Door, .91 m x 2.13 m Clear Opening
• One Connector Panel, 20.32 cm x 20.32 cm
• Reverberation Test per IEC 61000-4-21 in Steps from 80 MHz to 1 GHz per the Recommended Procedure
• Two Connector Panels, 15.24 cm x 61 cm
• Dielectric Floor Underlay 3.175 mm Thick
• Shield Test per IEEE 299, One Frequency Test at 1 GHz
• One Threaded Brass Ground Stud 1.27 cm Diameter x 12.7 cm Long
• Modular Shielded Room and Support Structure
• One ETS-Lindgren EMCenter™ with EMControl™ Device Controller Plug-in
• Interior Nominal Shield-to-shield Dimensions of 13.41 m x 6.09 m x 4.87 m
• One Door Maintenance Kit
• Guaranteed Performance and a Five-year Limited Warranty; One-year Warranty on Doors, Filters and Moving Parts; Two Year Warranty on Optional ETS-Lindgren's Equipment
Документы
SMART User Manual
641 Кб